Coral 71370

Qty

Colour: Black
Backing Material: Fabric-reinforced adhesive tape (cloth or scrim reinforced)
Adhesive Type: Aggressive rubber-based adhesive suited for multi-substrate bonding
Roll Format: Standard roll width (e.g., 50 mm) – confirm with supplier
Length: Typical roll length (confirm with supplier listing)
Thickness: Approximately [specify typical tape thickness] mm—(check datasheet)
Tensile Strength: High; backing designed to resist tearing under load
Operating Temperature Range: Typical duct tape temperature range might span from around -20 °C to +80 °C (verify exact)
Weather Resistance: Withstands moderate UV exposure, moisture and outdoor use

Adhesion Strength: Designed to adhere firmly to a variety of substrates including metals, plastics, painted surfaces and wood
Shear Resistance: Backing and adhesive combination engineered to resist shear forces and movement
Moisture Resistance: Suitable for damp conditions and temporary outdoor use; not equivalent to specialised waterproof sealing tape
Abrasion Resistance: Reinforced backing resists abrasion and systemic wear in maintenance environments

Standards: (If applicable) Meets relevant safety/handling standards for adhesives and tapes in the UK/EU—check supplier for certification
Storage Conditions: Store roll in cool, dry environment away from direct sunlight and extreme heat. Use within recommended shelf-life for best performance.
Delivery & Packaging: Supplied in sealed roll format. Check packaging for roll dimensions, width and length.
Disposal: Dispose of in accordance with local regulations for adhesive coated materials.

Measure and cut appropriate length of tape.
Apply starting from one end, smoothing across surface to remove air bubbles.
Overlap adjacent runs where needed for increased coverage.
For long-term or high-stress applications, ensure full contact and even pressure during application.
For removal: peel back slowly at low angle; remnants of adhesive may require a suitable solvent or cleaner to remove.